JEE (Advanced) -2013 Information Brochure

0

JEE (Advanced) -2013

Information Brochure

1

CONTENTS

1. INTRODUCTION 3

2. ABOUT JEE (Advanced) – 2013 3

2.1 Schedule 3

2.2 Type of Examination 4

2.3 Examination for Blind Candidates 4

2.4 Cities/Towns of Examination Centres 4

2.5 Use of Calculator and Communication Aids 4

3. ELIGIBILITY FOR JEE (Advanced) – 2013 4

3.1 Minimum Marks in Qualifying Examination (QE) 5

3.2 Number of JEE Attempts 5

3.3 Candidates Admitted Through Earlier IIT JEE 5

3.4 Important Points 5

4. RESERVATION OF SEATS 5

4.1 SC / ST Candidates 5

4.2 OBC Candidates 6

4.3 Persons with Physical Disability (PD) 6

4.4 Preparatory Course 6

5. PREFERENTIAL ALLOTMENT OF SEATS FOR DS CANDIDATES 6

6. HOW TO REGISTER FOR JEE (Advanced) – 2013 7

7. ADMIT CARD FOR JEE (ADVANCED) – 2013 7

7.1 Identity Verification 7

7.2 Safe-keep of the Admit Card 7

8. RESULTS OF JEE (Advanced) – 2013 8

9. PROCEDURES FOR DETERMINING THE CUT-OFF MARKS AND RANKING 8

9.1 Rank Lists 8

9.2 PD Merit List 8

2

9.3 Preparatory Course Merit List 8

9.4 Tie-break 8

10. COUNSELLING AND ADMISSIONS 8

10.1 Counselling 8

10.2 Physical Fitness 9

10.3 Requirements for Mining courses 9

10.4 Female candidates for Mining courses 9

10.5 Aptitude Test for B. Arch. for the JEE (Advanced) – 2013 Qualified Candidates 9

APPENDIX – 1 SYLLABUS FOR JEE (Advanced) – 2013 10

APPENDIX – 2

FORMAT OF REQUEST LETTER FOR SCRIBE AND EXTRA TIME FOR BLIND

CANDIDATES

15

APPENDIX – 3 LIST OF EXAMINATION CITIES/TOWNS FOR JEE (Advanced) – 2013 16

APPENDIX – 4 FORM OF CERTIFICATE TO BE PRODUCED BY SC/ST CANDIDATES 17

APPENDIX – 5 FORM OF CERTIFICATE TO BE PRODUCED BY OBC CANDIDATES 18

APPENDIX – 6

FORM OF CERTIFICATE TO BE PRODUCED BY PHYSICALLY DISABLE

CANDIDATES

19

APPENDIX – 7 WEBSITES, EMAIL ID AND ADDRESS OF ZONAL IITs FOR JEE (Advanced)-2013 21

APPENDIX – 8 SYLLABUS FOR APTITUTE TEST FOR B.Arch. PROGRAMMES 22

APPENDIX – 9 LIST OF COURSES AVAILABE IN ALL IITs AND ISM DHANBAD 23

APPENDIX – 10 IMPORTANT DATES 27

3

1. INTRODUCTION

Indian Institutes of Technology are institutions

of national importance established through an

Act of Parliament for fostering excellence in

education. There are sixteen IITs at present,

located at Bhubaneswar, Chennai, Delhi,

Gandhinagar, Guwahati, Hyderabad, Indore,

Jodhpur, Kanpur, Kharagpur, Mandi, Mumbai,

Patna, Ropar, Roorkee and Varanasi. Over the

years, IITs have created world class

educational platform that is dynamically

sustained through quality teaching and

internationally acclaimed research with

excellent infrastructure and the best available

minds. The faculty and alumni of IITs continue

to make huge impact in all sectors of society,

both in India and abroad. Indian School of

Mines Dhanbad is one of the oldest institutions

in India and is known for its immense

contributions towards society at large and for

science and technology in particular.

Primary objectives of these institutions are to:

• Build a solid foundation of scientific and

technical knowledge and thus to prepare

competent and motivated engineers and

scientists

• Create environment for freedom of thought,

cultivate vision, encourage growth, develop

personality and self-discipline for pursuit of

excellence

• Kindle entrepreneurial streak in the

students

The Institutes admit students with these

objectives and prepare them to become

outstanding professionals and contribute to

nation building. Today, alumni of these

institutions occupy key positions in industry and

academia, in India and abroad.

Each institute has well-equipped modern

laboratories, state-of-the-art computer network

and well-stocked technical library. Teaching

methods rely on direct personal contact

between the teachers and the students, and

the use of traditional and modern instructional

techniques. Students live in a pleasant and

intellectually stimulating environment with

people having similar goals and aspirations,

which is an exciting and unique experience.

These institutions offer courses leading to

Bachelor’s degree in a number of engineering,

technological and science disciplines.

Integrated M. Sc. courses in pure and applied

sciences and Integrated M. Tech. courses in a

few disciplines are also offered by some of

these Institutions. In addition, some IITs offer

Dual-Degree M. Tech. programmes, wherein

both B. Tech. and M. Tech. degrees are

awarded.

Credit-based academic programmes offer

flexibility to students to progress at their own

pace. A minimum level of performance is

necessary for satisfactory progress. The

medium of instruction is English.

Admission to all undergraduate programmes in

these institutions for Indian and Foreign

nationals will be made through a Joint Entrance

Examination (Advanced) – 2013. Only the top

1,50,000 candidates (including all categories)

who qualify in Paper – I of JEE (Main) – 2013

are eligible to appear in JEE (Advanced) –

2013. JEE (Main) – 2013 will be conducted by

JEE Apex Board during the month of April,

2013. (Details of JEE (Main) – 2013 are

available at http://www.jeemain.nic.in).

2. ABOUT JEE (Advanced) – 2013

JEE (Advanced) – 2013 will be jointly

conducted by IIT Bombay, IIT Delhi, IIT

Guwahati, IIT Kanpur, IIT Kharagpur, IIT

Madras and IIT Roorkee. These institutes are

henceforth referred to as the zonal IITs. The

details of the pattern and the dates of

examination, eligibility criteria and how to apply

are outlined below.

2.1 Schedule

The JEE (Advanced) – 2013 examination will

be held on Sunday, 2 June, 2013 as per the

schedule given below:

Paper 1: 09.00 to 12.00 hrs (IST)

Paper 2: 14.00 to 17.00 hrs (IST)

The schedule will remain unaltered even if the

above day is declared a public holiday.

4

2.2 Type of Examination

In JEE (Advanced) – 2013, there will be two

question papers, each of three hours duration.

The question papers will be bilingual (in

English and Hindi). Each of the question

papers will consist of three separate sections

on Physics, Chemistry and Mathematics. The

detailed syllabi are given in APPENDIX – 1.

The questions will be of objective type,

designed to test comprehension, reasoning

and analytical ability of candidates. In some

sections, incorrect answers will be awarded

negative marks.

The answers for each of the questions are to

be marked on a separate, 2-sheet carbonless

paper. Candidate must not separate or

disturb the alignment of the upper and

lower sheets at any stage during the

examination. The upper sheet is specially

designed machine readable sheet of paper

(ORS-Optical Response Sheet). While

answering each of the questions the candidate

is expected to darken the bub
ble(s) against

correct answer(s) only on the upper sheet

using black ball point pen. The darkening on

the upper sheet should be done in such a

manner that the impression is seen on the

lower sheet. Responses recorded on the upper

sheet only will be taken as final. The candidate

can take away the lower sheet with the

permission of the invigilator(s) at the end of the

examination.

2.3 Examination for Blind Candidates

A blind candidate can request for the services

of amanuensis (Scribe). For this, the candidate

must submit a separate request letter to the

Chairman of respective Zonal IIT while

registering for JEE (Advanced) – 2013 with a

copy of the PD certificate obtained from the

district medical board. The format of the letter

is given in APPENDIX – 2. Amanuensis of class

XI students of Commerce/Humanities without

Mathematics will be provided by the Presiding

Officer. One hour extra time will be allowed to

such candidates.

2.4 Cities/Towns of Examination Centres

JEE (Advanced) – 2013 will be conducted in

select major cities and towns of India. The list

is given in APPENDIX – 3. While registering,

candidates should select three towns/cities in

the same zone. All correspondence should be

addressed to that particular zonal IIT.

Efforts will be made to allot candidates’ choice.

However, in some exceptional circumstances,

a different city in the same zone may be

allotted. The examination centre allotted to

the candidates will not be changed under

any circumstances.

2.5 Use of Calculator and Communication

Aids

Use of electronic devices like mobile phone,

calculator, iPod, etc. is NOT PERMITTED in

JEE (Advanced) – 2013. Materials like log

table, book, notebook, etc. SHOULD NOT be

brought into the examination hall.

3. ELIGIBILITY FOR JEE (Advanced) – 2013

Candidates who wish to write JEE (Advanced)

– 2013 must write Paper – I of JEE (Main) –

2013 in the month of April 2013. For eligibility

conditions to appear in JEE (Main) – 2013,

please refer http://www.jeemain.nic.in. Only top

1,50,000 candidates (including all categories)

who qualify in Paper – I of JEE (Main) – 2013

will be eligible to appear for JEE (Advanced) –

2013.

Distribution of top 1,50,000 candidates across

various categories is as follows:

Top 75750 (50.5 %) Common Merit List

Top 40500 (27%) Other Backward Classes-

Non creamy layer OBC (NCL)

Top 22500 (15 %) Scheduled Caste (SC)

Top 11250 (7.5 %) Scheduled Tribe (ST)

3% of the total candidates in each category

are reserved for PD candidates as per GoI

norms.

5

3.1 Minimum Marks in Qualifying

Examination (QE)

Admission to IITs and ISM Dhanbad will be

based only on category wise All India Rank

(AIR) in JEE (Advanced) – 2013, subject to the

condition that such candidates are in the top 20

percentile of successful candidates of their

Boards in respective categories.

For candidates who passed their Board

examination for the first time in 2012, the

eligibility criteria for admission to any of the IITs

or ISM Dhanbad is 60% marks (55% marks for

SC/ST/PD) in their 12th Standard or equivalent

qualifying examination.

In case a Board does not provide the

information regarding the cut-off for top 20

percentile of successful candidates, the

candidate will have to produce a certificate

from the concerned Board stating that he/she

falls within the top 20 percentile. In case the

percentile score is not available from any

testing agency, the CBSE cut-off score for top

20 percentile for the student’s category will be

used.

If the candidate fails to do so, then the CBSE

percentile will be used as the criteria for

deciding minimum percentage of marks in the

qualifying examination.

If any Board awards only letter grades without

providing an equivalent percentage of marks

on the grade sheet, the candidate should

obtain a certificate from the Board specifying

the equivalent marks, and submit it at the time

of counselling. In case such a certificate is not

provided the decision taken by the Joint

Implementation Committee (JIC) of JEE

(Advanced) – 2013 will be final.

3.2 Number of JEE Attempts

A candidate can attempt JEE (Advanced)

maximum two times in consecutive years.

Candidates who had attempted IIT JEE 2012

for the first time (having passed QE in 2012)

can appear in JEE (Advanced) – 2013, by

qualifying in Paper – I of JEE (Main) – 2013.

Those who attempted IIT-JEE in 2011 or earlier

are NOT ELIGIBLE to appear in JEE

(Advanced) – 2013.

3.3 Candidates Admitted Through Earlier IIT

JEE

Candidates who have taken admission

(irrespective of whether or not they continued

in any of the programmes) or accepted the

admission by paying the registration fee at any

of the IITs, IT-BHU Varanasi or ISM Dhanbad,

are NOT ELIGIBLE to appear in JEE

(Advanced) – 2013.

3.4 Important Points

(i) The offer of admission is subject to

verification of all original certificates/

documents at the time of counselling. If any

candidate is found ineligible at a later date

even after admission to an Institute, his/her

admission will be cancelled.

(ii) The decision of the Joint Admission Board

of JEE (Advanced) – 2013 regarding the

eligibility/admission of any applicant shall

be final.

4. RESERVATION OF SEATS

As per Government of India rules candidates

belonging to certain categories are admitted to

seats reserved for them based on relaxed

criteria. These categories are:

• Other Backward Classes (OBC) if they

belong to Non-Creamy Layer (NCL)

• Scheduled Castes (SC)

• Scheduled Tribes (ST)

• Persons with Physical Disability (PD)

Benefit of reservation shall be given only to

those classes/castes/tribes which are in the

respective central list published by the

Government of India.

4.1 SC/ST Candidates

For the SC and ST categories, 15% and 7.5%

seats, respectively, are reserved in every

programme in all IITs and ISM Dhanbad.

Candidates belonging to these categories are

6

declared qualified on the basis of a relaxed

criterion.

Candidates belonging to SC/ST categories will

be required to produce the original caste/ tribe

certificate issued by a competent authority in

the prescribed format (APPENDIX – 4) during

counselling. Certificates in any other format will

not be accepted. Seats remaining vacant in

these categories shall not be filled by

candidates belonging to any other category.

Attested copies of category certificates must be

submitted to the concerned Zonal IIT along

with the registration number of JEE (Advanced)

– 2013 during 8 May – 31 May, 2013.

4.2 OBC Candidates

For candidates belonging to OBC (non creamy

layer), 27% of the seats are reserved in all IITs,

and ISM Dhanbad.

For the purpose of reservation of seats in JEE< /p>

(Advanced) – 2013, a candidate will be

considered as OBC only if he/she belongs to

the non-creamy layer of the central list of

Government of India in OBC category.

In case the reserved seats in this category are

not filled, they can be filled by GE category

candidates.

Attested copies of category certificates issued

after 31 May 2012 by a competent authority in

the prescribed format (APPENDIX – 5) must be

submitted to the concerned Zonal IIT along

with the registration number of JEE (Advanced)

– 2013 during 8 May – 31 May, 2013.

4.3 Persons with Physical Disability (PD)

In each institute 3% of seats in every category

are reserved for PD candidates. For any

category of disability (viz., locomotor, visual,

dyslexia, speech, and/or hearing) benefit would

be given to those who have at least 40%

impairment. Leprosy-cured candidates who are

otherwise fit to pursue the course are also

included in this category. Candidates belonging

to this category are qualified on the basis of a

relaxed criterion.

PD Candidates will be required to produce the

original certificate issued by a district medical

board/competent authority in the prescribed

format (APPENDIX – 6) at the time of

counselling. Certificates in any other format will

not be accepted.

Attested copies of PD certificates must be

submitted to the concerned Zonal IIT along

with the registration number of JEE (Advanced)

– 2013 during 8 May – 31 May, 2013.

4.4 Preparatory Course

In case the seats reserved for SC/ST/PD

candidates are not filled, a limited number of

candidates are admitted to a Preparatory

Course of one-year duration on the basis of

further relaxation of admission criterion.

Admission is given to the candidates in the

preparatory course provided (i) the seats

reserved for the respective category are vacant

(ii) candidates satisfy minimum norms, and (iii)

candidates have not undergone the

Preparatory Course earlier. On successful

completion of the course, the students will be

offered a direct admission to the undergraduate

programs in July 2014, against the unfilled

reserved seats of JEE (Advanced) – 2013.

5. PREFERENTIAL ALLOTMENT OF

SEATS FOR DS CANDIDATES

Two seats are available for preferential

allotment in each institute for children of

defence/paramilitary personnel killed or

permanently disabled in action during war or

peacetime operations (DS).

Such candidates should submit a copy of the

relevant certificate issued by a competent

authority in the Directorate of Resettlement and

Rehabilitation, New Delhi under the Ministry of

Defence, Govt. of India or in the Ministry of

Home Affairs, Govt. of India, as applicable,

along with the registration of JEE (Advanced) –

2013. To avail this preferential allotment,

he/she must obtain a rank in the Common

Merit List of JEE (Advanced) – 2013 and should

produce original copy of certificate at the time

of counselling.

7

6. HOW TO REGISTER FOR JEE (Advanced)

– 2013

Scores of JEE (Main) – 2013 will be declared

by 7 May, 2013. Top 1,50,000 candidates

qualified in Paper – I (including all the

categories) are eligible to register for JEE

(Advanced) – 2013. To write JEE (Advanced) –

2013 all eligible candidates should register

through online at [http://jeeadv.iitd.ac.in/] during

8 May to 13 May, 2013.

After online registration, candidates must pay

the examination fee as applicable through

challan (generated during registration process)

of all SBI branches having core banking

solution (CBS) on or before 13 May, 2013.

The examination fee for GE and OBC(NCL)

male candidates is Rs.1800/-. The fee for SC,

ST, PD male candidates is Rs. 900/-. There is

no fee for female candidates of all categories.

Registration is complete only after the

payment.

Important: The applicants must note that

application for JEE (Advanced) – 2013 cannot

be withdrawn after registration and payment of

fee. Claims for refund of registration fee will

not be entertained under any

circumstances.

While registering for JEE (Advanced) – 2013,

candidate need to provide following

information.

Attempt(s) at JEE

Choices of Examination Cities/Towns

Entitlement for DS category

Note: APPENDIX – 3 lists the cities/towns and

their corresponding codes where the

examination centres are located. Candidates

should select three different cities/towns from

the same zone.

7. ADMIT CARD FOR JEE (ADVANCED) –

2013

After successful registration and payment of

required fee through bank, the candidates can

download their admit card for JEE (Advanced) –

2013 from 14 May to 31 May, 2013 from their

Zonal IIT JEE (Advanced) – 2013 portal.

Addresses of Zonal IITs JEE portals are

available in Appendix – 7.

The admit card will bear registration number of

JEE (Advanced) – 2013, photograph and the

personal details of the candidate, along with

name and address of the Examination Centre

allotted.

If the admit card is not available in the Zonal IIT

Portal by 15 May, 2013, candidates can

contact immediately the Zonal IIT through

Phone/Email/Fax (Details of Zonal IITs are

available in Appendix – 7).

Candidate should carefully examine their Admit

Card for all the entries made therein. In case of

any discrepancy, candidate should inform the

Zonal IIT immediately. Candidate must bring

the hard copy of the downloaded admit card to

the examination centre. Only those

candidates, who carry valid Admit Cards to

the examination hall, will be allowed to write

the examination.

7.1 Identity Verification

At the examination hall, the admit card should

be presented to the invigilators for verification.

The candidate’s identity will be verified with

respect to his/her details on the admit card and

the centre verification record. If the identity is in

doubt, the candidate will not be allowed to

appear in the examination. The authorities may

at their discretion permit the candidate to

appear for the examination after completing

formalities including taking of thumb

impression. No extra time will be allowed for

these formalities to be completed.

The original admit card for the JEE (Advanced)

– 2013 will be issued to the candidates in the

respective examination centre on the day of

examination after verifying their candidature.

Any impersonation will lead to disqualification

in JEE (Advanced) – 2013.

7.2 Safe-keep of the Admit Card

Since the qualified candidates are required to

produce the original Admit Card at the time of

8

counselling and admission, it should be

carefully preserved till the admission process

through JEE (Advanced) – 2013 is completed.

8. RESULTS OF JEE (Advanced) – 2013

The answer sheets of JEE (Advanced) – 2013

are a machine-readable Optical Response

Sheet (ORS). These sheets are grade
d and

scrutinized with extreme care after the

examination.

Candidates can view the answer keys of JEE

(Advanced) – 2013 on Zonal IIT JEE

(Advanced) portal.

Candidates will get to know their All India

Ranks (AIR) / Category ranks of JEE

(Advanced) – 2013 through Zonal IIT websites

on 23 June, 2013.

9 PROCEDURES FOR DETERMINING THE

CUT-OFF MARKS AND RANKING

Only those candidates who attempted both

Paper – 1 and Paper – 2 of JEE (Advanced) –

2013 will be considered for the ranking. Marks

in Physics in JEE (Advanced) – 2013 will be

equal to marks in Physics section of Paper – 1

plus marks in Physics section of Paper – 2.

Similar procedures will be followed for

Chemistry and Mathematics. The sum of the

marks obtained in the individual subjects will be

the aggregate marks for the candidate.

9.1 Rank Lists

Based on the performance in JEE (Advanced) –

2013, a Common Merit List (CML) will be

prepared. Candidates must score at least 10%

in each subject and 35% in aggregate in order

to be in the CML.

Separate merit lists will be prepared

corresponding to OBC (NCL), SC and ST

categories.

Candidates of OBC (NCL) category must score

at least 9% in each subject and 31.5% in

aggregate in order to be in the OBC merit list.

Candidates of SC and ST categories must

score at least 5% in each subject and 17.5% in

aggregate in order to be in their respective

merit lists.

9.2 PD Merit Lists

Separate PD merit lists will be prepared

corresponding to the GE, OBC (NCL), SC and

ST categories. To be in these respective merit

lists, candidates must score at least 5% in each

subject and 17.5% in aggregate.

9.3 Preparatory Course Merit Lists

Separate merit lists will be prepared for

preparatory course only if the number of

SC/ST/PD candidates in the respective merit

lists is less than 1.4 times the number of seats

available in the respective categories. To be in

these merit lists, candidates must score at least

2.5% in each subject and 8.75% in aggregate.

While preparing the merit lists, if a candidate

belongs to more than one category of relaxed

norms, then he/she for the purpose of ranking

shall be considered in all the categories in

which he/she qualifies. There will be no

separate waiting list for such candidates.

9.4 Tie-break

The tie-break criterion in the various merit lists

adopted for awarding ranks to the candidates

who have scored the same aggregate marks is

as follows: Higher rank for higher marks in

Mathematics, followed by marks in Physics and

same rank in case both the candidates have

the same marks in each of the three subjects.

Note: Obtaining a rank in JEE (Advanced) –

2013 does not guarantee admission to any

of the courses available in IITs and ISM

Dhanbad.

10. COUNSELLING AND ADMISSIONS

10.1 Counselling

The details of courses available in the

participating institutes are given in APPENDIX

– 9 (Provisional). Some institutes may offer new

courses not listed in the appendix. Information

regarding these courses will be available at the

time of counselling.

9

The seats in various courses of the institutes

(IITs and ISM Dhanbad) are allotted strictly on

the basis of the All India Rank, category rank,

and the choices indicated by each qualified

candidate at the time of counselling.

The details of the counselling and admission

procedure will be published on the JEE

(Advanced) – 2013 zonal IIT websites.

The results of JEE (Advanced) – 2013 are also

being used by other institutions for admissions

to their courses / programmes. The names of

these institutes will be published on the JEE

(Advanced) – 2013 websites at a later date.

Candidates should contact these institutes

directly for admission.

10.2 Physical Fitness

Candidates who qualify in JEE (Advanced) –

2013 will have to submit a physical fitness

certificate from a registered medical

practitioner in the prescribed format that will be

made available at an appropriate time.

Candidates will be admitted only if they are

physically fit for pursuing a course of study at

the participating institutes.

10.3 Requirements for Mining Courses

Those who opt for Mining Engineering and

Mining Machinery courses should make sure

that they do not have any form of colour

blindness. They will be required to submit a

certificate from a registered medical

practitioner to this effect at the time of

counselling/ admission. The standards of visual

acuity with or without glasses will be adhered

to strictly for candidates seeking admission to

Mining Engineering as per DGMS Circular 14

of 1972. Persons with one-eyed vision are not

permitted to work underground. Candidates

with the above limitations are not allowed to opt

for admission to Mining Engineering or Mining

Machinery Engineering.

10.4 Female Candidates for Mining Courses

Section 46 (1) of the Mines Act, 1952 states

that “No woman shall, notwithstanding anything

contained in any other law, be employed (a) in

any part of a mine which is below ground, (b) in

any mine above ground except between 6:00

and 19:00 hrs.”. Hence, female candidates are

not admitted to Mining Engineering and Mining

Machinery Engineering at ISM Dhanbad,

whereas the corresponding programmes at IIT

Kharagpur and IIT (BHU) Varanasi have no

such restriction.

10.5 Aptitude Test for B. Arch. for the IITJEE

(Advanced) – 2013 Qualified Candidates

Candidates desirous of joining the B. Arch.,

courses will be required to qualify in an

Aptitude Test to be conducted at all zonal IITs

on 28 June, 2013. However the seat allotment

will be done based on the category wise all

India Rank in the JEE (Advanced) -2013. The

test will consist of one paper of three hours

duration – from 09:00 to 12:00 hrs. Question

papers for Aptitude Test for B. Arch. will be in

English only. Syllabus for this test is given in

APPENDIX – 8. Candidates must register

online at http://jeeadv.iitd.ac.in for this Aptitude

Test between 24 and 26 June, 2013.

10

SYLLABUS FOR JEE (Advanced) – 2013

Chemistry

Physical Chemistry

General topics: Concept of atoms and

molecules; Dalton’s atomic theory; Mole

concept; Chemical formulae; Balanced

chemical equations; Calculations (based on

mole concept) involving common oxidationreduction,

neutralisation, and displacement

reactions; Concentration in terms of mole

fraction, molarity, molality and normality.

Gaseous and liquid states: Absolute scale of

temperature, ideal gas equation; Deviation

from ideality, van der Waals equation; Kinetic

theory of gases; Average, root mean square

and most probable velocities and their relation

with temperature; Law of partial pressures;

Vapour pressure; Diffusion of gases.

Atomic structure and chemical bonding
:

Bohr model, spectrum of hydrogen atom,

quantum numbers; Wave-particle duality, de

Broglie hypothesis; Uncertainty principle;

Qualitative quantum mechanical picture of

hydrogen atom, shapes of s, p and d orbitals;

Electronic configurations of elements (up to

atomic number 36); Aufbau principle; Pauli’s

exclusion principle and Hund’s rule; Orbital

overlap and covalent bond; Hybridisation

(involving s, p and d orbitals only); Orbital

energy diagrams for homonuclear diatomic

species; Hydrogen bond; Polarity in

molecules, dipole moment (qualitative aspects

only); VSEPR model and shapes of molecules

(linear, angular, triangular, square planar,

pyramidal, square pyramidal, trigonal

bipyramidal, tetrahedral and octahedral).

Energetics: First law of thermodynamics;

Internal energy, work and heat, pressurevolume

work; Enthalpy, Hess’s law; Heat of

reaction, fusion and vapourization; Second law

of thermodynamics; Entropy; Free energy;

Criterion of spontaneity.

Chemical equilibrium: Law of mass action;

Equilibrium constant, Le Chatelier’s principle

(effect of concentration, temperature and

pressure); Significance of ΔG and ΔGo in

chemical equilibrium; Solubility product,

common ion effect, pH and buffer solutions;

Acids and bases (Bronsted and Lewis

concepts); Hydrolysis of salts.

Electrochemistry: Electrochemical cells and

cell reactions; Standard electrode potentials;

Nernst equation and its relation to ΔG;

Electrochemical series, emf of galvanic cells;

Faraday’s laws of electrolysis; Electrolytic

conductance, specific, equivalent and molar

conductivity, Kohlrausch’s law; Concentration

cells.

Chemical kinetics: Rates of chemical

reactions; Order of reactions; Rate constant;

First order reactions; Temperature dependence

of rate constant (Arrhenius equation).

Solid state: Classification of solids, crystalline

state, seven crystal systems (cell parameters

a, b, c,α ,β ,γ ), close packed structure of solids

(cubic), packing in fcc, bcc and hcp lattices;

Nearest neighbours, ionic radii, simple ionic

compounds, point defects.

Solutions: Raoult’s law; Molecular weight

determination from lowering of vapour

pressure, elevation of boiling point and

depression of freezing point.

Surface chemistry: Elementary concepts of

adsorption (excluding adsorption isotherms);

Colloids: types, methods of preparation and

general properties; Elementary ideas of

emulsions, surfactants and micelles (only

definitions and examples).

Nuclear chemistry: Radioactivity: isotopes

and isobars; Properties of α ,β andγ rays;

Kinetics of radioactive decay (decay series

excluded), carbon dating; Stability of nuclei

with respect to proton-neutron ratio; Brief

discussion on fission and fusion reactions.

Inorganic Chemistry

Isolation/preparation and properties of the

following non-metals: Boron, silicon,

nitrogen, phosphorus, oxygen, sulphur and

halogens; Properties of allotropes of carbon

(only diamond and graphite), phosphorus and

sulphur.

Preparation and properties of the following

compounds: Oxides, peroxides, hydroxides,

carbonates, bicarbonates, chlorides and

sulphates of sodium, potassium, magnesium

and calcium; Boron: diborane, boric acid and

borax; Aluminium: alumina, aluminium chloride

APPENDIX – 1

11

and alums; Carbon: oxides and oxyacid

(carbonic acid); Silicon: silicones, silicates and

silicon carbide; Nitrogen: oxides, oxyacids and

ammonia; Phosphorus: oxides, oxyacids

(phosphorus acid, phosphoric acid) and

phosphine; Oxygen: ozone and hydrogen

peroxide; Sulphur: hydrogen sulphide, oxides,

sulphurous acid, sulphuric acid and sodium

thiosulphate; Halogens: hydrohalic acids,

oxides and oxyacids of chlorine, bleaching

powder; Xenon fluorides.

Transition elements (3d series): Definition,

general characteristics, oxidation states and

their stabilities, colour (excluding the details of

electronic transitions) and calculation of spinonly

magnetic moment; Coordination

compounds: nomenclature of mononuclear

coordination compounds, cis-trans and

ionisation isomerisms, hybridization and

geometries of mononuclear coordination

compounds (linear, tetrahedral, square planar

and octahedral).

Preparation and properties of the following

compounds: Oxides and chlorides of tin and

lead; Oxides, chlorides and sulphates of Fe2+,

Cu2+ and Zn2+; Potassium permanganate,

potassium dichromate, silver oxide, silver

nitrate, silver thiosulphate.

Ores and minerals: Commonly occurring ores

and minerals of iron, copper, tin, lead,

magnesium, aluminium, zinc and silver.

Extractive metallurgy: Chemical principles

and reactions only (industrial details excluded);

Carbon reduction method (iron and tin); Self

reduction method (copper and lead);

Electrolytic reduction method (magnesium and

aluminium); Cyanide process (silver and gold).

Principles of qualitative analysis: Groups I to

V (only Ag+, Hg2+, Cu2+, Pb2+, Bi3+, Fe3+,

Cr3+, Al3+, Ca2+, Ba2+, Zn2+, Mn2+ and

Mg2+); Nitrate, halides (excluding fluoride),

sulphate and sulphide.

Organic Chemistry

Concepts: Hybridisation of carbon; Sigma and

pi-bonds; Shapes of simple organic molecules;

Structural and geometrical isomerism; Optical

isomerism of compounds containing up to two

asymmetric centres, (R,S and E,Z

nomenclature excluded); IUPAC nomenclature

of simple organic compounds (only

hydrocarbons, mono-functional and bifunctional

compounds); Conformations of

ethane and butane (Newman projections);

Resonance and hyperconjugation; Keto-enol

tautomerism; Determination of empirical and

molecular formulae of simple compounds (only

combustion method); Hydrogen bonds:

definition and their effects on physical

properties of alcohols and carboxylic acids;

Inductive and resonance effects on acidity and

basicity of organic acids and bases; Polarity

and inductive effects in alkyl halides; Reactive

intermediates produced during homolytic and

heterolytic bond cleavage; Formation,

structure and stability of carbocations,

carbanions and free radicals.

Preparation, properties and reactions of

alkanes: Homologous series, physical

properties of alkanes (melting points, boiling

points and density); Combustion and

halogenation of alkanes; Preparation of

alkanes by Wurtz reaction and decarboxylation

reactions.

Preparation, properties and reactions of

alkenes and alkynes: Physical properties of

alkenes and alkynes (boiling points, density

and dipole moments); Acidity of alkynes; Acid

catalysed hydration of alkenes and alkynes

(excluding the stereochemistry of addition and

elimination); Reactions of alkenes with KMnO4

and ozone; Reduction of alkenes and alkynes;

Preparation of alkenes and alkynes by

elimination reactions; Electrophilic addition

reacti
ons of alkenes with X2, HX, HOX and

H2O (X=halogen); Addition reactions of

alkynes; Metal acetylides.

Reactions of benzene: Structure and

aromaticity; Electrophilic substitution reactions:

halogenation, nitration, sulphonation, Friedel-

Crafts alkylation and acylation; Effect of o-, mand

p-directing groups in monosubstituted

benzenes.

Phenols: Acidity, electrophilic substitution

reactions (halogenation, nitration and

sulphonation); Reimer-Tiemann reaction, Kolbe

reaction.

Characteristic reactions of the following

(including those mentioned above): Alkyl

halides: rearrangement reactions of alkyl

12

carbocation, Grignard reactions, nucleophilic

substitution reactions; Alcohols: esterification,

dehydration and oxidation, reaction with

sodium, phosphorus halides,

ZnCl2/concentrated HCl, conversion of

alcohols into aldehydes and ketones; Ethers:

Preparation by Williamson’s Synthesis;

Aldehydes and Ketones: oxidation, reduction,

oxime and hydrazone formation; Aldol

condensation, Perkin reaction; Cannizzaro

reaction; Haloform reaction and nucleophilic

addition reactions (Grignard addition);

Carboxylic acids: formation of esters, acid

chlorides and amides, ester hydrolysis;

Amines: basicity of substituted anilines and

aliphatic amines, preparation from nitro

compounds, reaction with nitrous acid, azo

coupling reaction of diazonium salts of

aromatic amines, Sandmeyer and related

reactions of diazonium salts; carbylamine

reaction; Haloarenes: nucleophilic aromatic

substitution in haloarenes and substituted

haloarenes (excluding Benzyne mechanism

and Cine substitution).

Carbohydrates: Classification; mono- and disaccharides

(glucose and sucrose); Oxidation,

reduction, glycoside formation and hydrolysis

of sucrose.

Amino acids and peptides: General structure

(only primary structure for peptides) and

physical properties.

Properties and uses of some important

polymers: Natural rubber, cellulose, nylon,

teflon and PVC.

Practical organic chemistry: Detection of

elements (N, S, halogens); Detection and

identification of the following functional groups:

hydroxyl (alcoholic and phenolic), carbonyl

(aldehyde and ketone), carboxyl, amino and

nitro; Chemical methods of separation of

mono-functional organic compounds from

binary mixtures.

Mathematics

Algebra: Algebra of complex numbers,

addition, multiplication, conjugation, polar

representation, properties of modulus and

principal argument, triangle inequality, cube

roots of unity, geometric interpretations.

Quadratic equations with real coefficients,

relations between roots and coefficients,

formation of quadratic equations with given

roots, symmetric functions of roots.

Arithmetic, geometric and harmonic

progressions, arithmetic, geometric and

harmonic means, sums of finite arithmetic and

geometric progressions, infinite geometric

series, sums of squares and cubes of the first n

natural numbers.

Logarithms and their properties.

Permutations and combinations, Binomial

theorem for a positive integral index, properties

of binomial coefficients.

Matrices as a rectangular array of real

numbers, equality of matrices, addition,

multiplication by a scalar and product of

matrices, transpose of a matrix, determinant of

a square matrix of order up to three, inverse of

a square matrix of order up to three, properties

of these matrix operations, diagonal, symmetric

and skew-symmetric matrices and their

properties, solutions of simultaneous linear

equations in two or three variables.

Addition and multiplication rules of probability,

conditional probability, Bayes Theorem,

independence of events, computation of

probability of events using permutations and

combinations.

Trigonometry: Trigonometric functions, their

periodicity and graphs, addition and subtraction

formulae, formulae involving multiple and submultiple

angles, general solution of

trigonometric equations.

Relations between sides and angles of a

triangle, sine rule, cosine rule, half-angle

formula and the area of a triangle, inverse

trigonometric functions (principal value only).

Analytical geometry (2 dimensions):

Cartesian coordinates, distance between two

points, section formulae, shift of origin.

Equation of a straight line in various forms,

angle between two lines, distance of a point

from a line; Lines through the point of

intersection of two given lines, equation of the

bisector of the angle between two lines,

concurrency of lines; Centroid, orthocentre,

incentre and circumcentre of a triangle.

13

Equation of a circle in various forms, equations

of tangent, normal and chord.

Parametric equations of a circle, intersection of

a circle with a straight line or a circle, equation

of a circle through the points of intersection of

two circles and those of a circle and a straight

line.

Equations of a parabola, ellipse and hyperbola

in standard form, their foci, directrices and

eccentricity, parametric equations, equations of

tangent and normal.

Locus Problems.

Analytical geometry (3 dimensions):

Direction cosines and direction ratios, equation

of a straight line in space, equation of a plane,

distance of a point from a plane.

Differential calculus: Real valued functions of

a real variable, into, onto and one-to-one

functions, sum, difference, product and

quotient of two functions, composite functions,

absolute value, polynomial, rational,

trigonometric, exponential and logarithmic

functions.

Limit and continuity of a function, limit and

continuity of the sum, difference, product and

quotient of two functions, L’Hospital rule of

evaluation of limits of functions.

Even and odd functions, inverse of a function,

continuity of composite functions, intermediate

value property of continuous functions.

Derivative of a function, derivative of the sum,

difference, product and quotient of two

functions, chain rule, derivatives of polynomial,

rational, trigonometric, inverse trigonometric,

exponential and logarithmic functions.

Derivatives of implicit functions, derivatives up

to order two, geometrical interpretation of the

derivative, tangents and normals, increasing

and decreasing functions, maximum and

minimum values of a function, Rolle’s Theorem

and Lagrange’s Mean Value Theorem.

Integral calculus: Integration as the inverse

process of differentiation, indefinite integrals of

standard functions, definite integrals and their

properties, Fundamental Theorem of Integral

Calculus.

Integration by parts, integration by the methods

of substitution and partial fractions, application

of definite integrals to the determination of

areas involving simple curves.

Formation of ordinary differential equations,

solution of homogeneous differential equations,

separation of variables method, linear first

order differential equations.

Vectors: Addition of vectors, scalar

multiplication, dot and cross products, scalar

triple products and their geometrical

interpretations.

Physics

General: Units and dimensions, dimensional

analysis; least count, significant figures;

Methods of measurement and error analysis for

physical quantities pertaining to the following

experiments: Experiments based on using

Vernier calipers and screw gauge

(micrometer), Determination of g using simple

pendulum, Young’s modulus by Searle’s

method, Specific heat of a liquid using

calorimeter, focal length of a concave mirror

and a convex lens using u-v method, Speed of

sound using resonance column, Verification of

Ohm’s law using voltmeter and ammeter, and

specific resistance of the material of a wire

using meter bridge and post office box.

Mechanics: Kinematics in one and two

dimensions (Cartesian coordinates only),

projectiles; Uniform Circular motion; Relative

velocity.

Newton’s laws of motion; Inertial and uniformly

accelerated frames of reference; Static and

dynamic friction; Kinetic and potential energy;

Work and power; Conservation of linear

momentum and mechanical energy.

Systems of particles; Centre of mass and its

motion; Impulse; Elastic and inelastic collisions.

Law of gravitation; Gravitational potential and

field; Acceleration due to gravity; Motion of

planets and satellites in circular orbits; Escape

velocity.

Rigid body, moment of inertia, parallel and

perpendicular axes theorems, moment of

inertia of uniform bodies with simple

geometrical shapes; Angular momentum;

Torque; Conservation of angular momentum;

Dynamics of rigid bodies with fixed axis of

rotation; Rolling without slipping of rings,

14

cylinders and spheres; Equilibrium of rigid

bodies; Collision of point masses with rigid

bodies.

Linear and angular simple harmonic motions.

Hooke’s law, Young’s modulus.

Pressure in a fluid; Pascal’s law; Buoyancy;

Surface energy and surface tension, capillary

rise; Viscosity (Poiseuille’s equation excluded),

Stoke’s law; Terminal velocity, Streamline flow,

equation of continuity, Bernoulli’s theorem and

its applications.

Wave motion (plane waves only), longitudinal

and transverse waves, superposition of waves;

Progressive and stationary waves; Vibration of

strings and air columns; Resonance; Beats;

Speed of sound in gases; Doppler effect (in

sound).

Thermal physics: Thermal expansion of

solids, liquids and gases; Calorimetry, latent

heat; Heat conduction in one dimension;

Elementary concepts of convection and

radiation; Newton’s law of cooling; Ideal gas

laws; Specific heats (Cv and Cp for

monoatomic and diatomic gases); Isothermal

and adiabatic processes, bulk modulus of

gases; Equivalence of heat and work; First law

of thermodynamics and its applications (only

for ideal gases); Blackbody radiation:

absorptive and emissive powers; Kirchhoff’s

law; Wien’s displacement law, Stefan’s law.

Electricity and magnetism: Coulomb’s law;

Electric field and potential; Electrical potential

energy of a system of point charges and of

electrical dipoles in a uniform electrostatic field;

Electric field lines; Flux of electric field; Gauss’s

law and its application in simple cases, such

as, to find field due to infinitely long straight

wire, uniformly charged infinite plane sheet and

uniformly charged thin spherical shell.

Capacitance; Parallel plate capacitor with and

without dielectrics; Capacitors in series and

parallel; Energy stored in a capacitor.

Electric current; Ohm’s law; Series and parallel

arrangements of resistances and cells;

Kirchhoff’s laws and simple applications;

Heating effect of current.

Biot–Savart’s law and Ampere’s law; Magnetic

field near a current-carrying straight wire, along

the axis of a circular coil and inside a long

straight solenoid; Force on a moving charge

and on a current-carrying wire in a uniform

magnetic field.

Magnetic moment of a current loop; Effect of a

uniform magnetic field on a current loop;

Moving coil galvanometer, voltmeter, ammeter

and their conversions.

Electromagnetic induction: Faraday’s law,

Lenz’s law; Self and mutual inductance; RC,

LR and LC circuits with d.c. and a.c. sources.

Optics: Rectilinear propagation of light;

Reflection and refraction at plane and spherical

surfaces; Total internal reflection; Deviation

and dispersion of light by a prism; Thin lenses;

Combinations of mirrors and thin lenses;

Magnification.

Wave nature of light: Huygen’s principle,

interference limited to Young’s double-slit

experiment.

Modern physics: Atomic nucleus; Alpha, beta

and gamma radiations; Law of radioactive

decay; Decay constant; Half-life and mean life;

Binding energy and its calculation; Fission and

fusion processes; Energy calculation in these

processes.

Photoelectric effect; Bohr’s theory of hydrogenlike

atoms; Characteristic and continuous Xrays,

Moseley’s law; de Broglie wavelength of

matter waves

15

APPENDIX – 2

FORMAT OF REQUEST LETTER FOR SCRIBE AND EXTRA TIME FOR BLIND

CANDIDATES

Date:

Name of the candidate :

Application Number of JEE (Main)-2013:

Registration Number of JEE (Advanced) -2013:

Address:_________________________________

__________________________________

__________________________________

Mobile: Email:

To

The Chairman

JEE (Advanced) – 2013

Indian Insitute of Technology ___________________(Write Appropriate Zone)

Sub: Requirement of SCRIBE and EXTRA TIME

Dear Sir,

I am a blind candidate and I would like to use the services of a scribe for writing JEE (Advanced) – 2013. I

also request you to provide one hour extra time in each paper.

I undertake to abide by the rules and regulations in this connection prescribed in the information brochure

of JEE (Advanced) – 2013.

Thanking you,

_________________________

Signature/Left Thumb Impression of the candidate Signature of the Parent/Guardian

(Name of the candidate) (Name of the Parent/Guardian)

Enclosure: Attested copy of PD Certificate (APPENDIX – 6) issued by competent authority.

16

APPENDIX – 3

LIST OF EXAMINATION CITIES / TOWNS FOR JEE (Advanced)-2013

IIT BOMBAY ZONE

State/City/Town Code

GOA

Panaji 101

GUJARAT

Ahmedabad 102

Surat 103

Vadodara 104

MAHARASHTRA

Mumbai 105

Nagpur 106

Navi Mumbai 107

Pune 108

RAJASTHAN

Ajmer 109

Jaipur 110

Jodhpur 111

IIT DELHI ZONE

State/City/Town Code

DELHI

Delhi (East) 201

Delhi (West) 202

Delhi (North) 203

Delhi (South) 204

Delhi (Central) 205

HARYANA

Faridabad 206

Gurgaon 207

JAMMU & KASHMIR

Jammu 208

MADHYA PRADESH

Indore 209

RAJASTHAN

Sikar 210

Udaipu
r 211

UTTAR PRADESH

Aligarh 212

Mathura 213

UAE

Dubai 214

IIT GUWAHATI ZONE

State/City/Town Code

ARUNACHAL PRADESH

Itanagar 301

ASSAM

Guwahati 302

Jorhat 303

Silchar 304

BIHAR

Gaya 305

Katihar 306

Muzaffarpur 307

Patna 308

MANIPUR

Imphal 309

MEGHALAYA

Shillong 310

WEST BENGAL

Siliguri 311

IIT KANPUR ZONE

State/City/Town Code

MADHYA PRADESH

Bhopal 401

Gwalior 402

Jabalpur 403

UTTARAKHAND

Pantnagar 404

UTTAR PRADESH

Agra 405

Allahabad 406

Gorakhpur 407

Jhansi 408

Kanpur 409

Lucknow 410

IIT KHARAGPUR ZONE

State/City/Town Code

ANDAMAN AND

NICOBAR ISLANDS

Port Blair 501

ANDHRA PRADESH

Visakhapatnam 502

CHATTISGARH

Bhilai 503

Bilaspur 504

Raipur 505

JHARKHAND

Bokaro 506

Dhanbad 507

Jamshedpur 508

Ranchi 509

ORISSA

Bhubaneswar 510

Rourkela 511

SIKKIM

Gangtok 512

TRIPURA

Agartala 513

WEST BENGAL

Durgapur 514

Kharagpur 515

Kolkata (North) 516

Kolkata (Salt Lake) 517

Kolkata (South) 518

Malda 519

IIT MADRAS ZONE

State/City/Town Code

ANDHRA PRADESH

Hyderabad 601

Nellore 602

Vijayawada 603

Warangal 604

KARNATAKA

Bangalore 605

Mangalore 606

KERALA

Kochi 607

Kozhikode 608

Thiruvananthapuram 609

PUDUCHERRY

Puducherry 610

TAMIL NADU

Chennai 611

Madurai 612

IIT ROORKEE ZONE

State/City/Town Code

CHANDIGARH

Chandigarh 701

HARYANA

Kurukshetra 702

Panipat 703

Rohtak 704

HIMACHAL PRADESH

Palampur 705

Shimla 706

PUNJAB

Amritsar 707

Bathinda 708

Jalandhar 709

Ludhiana 710

Patiala 711

UTTARAKHAND

Dehradun 712

Roorkee 713

UTTAR PRADESH

Bareilly 714

Gautam Budh Nagar 715

(Noida)

Ghaziabad 716

Meerut 717

Moradabad 718

Varanasi 719

APPENDIX – 4

FORM OF CERTIFICATE TO BE PRODUCED BY SCHEDULED CASTES

AND SCHEDULED TRIBES CANDIDATES

1. This is to certify that Shri/ Shrimati/ Kumari* ___________________________________________

son/daughter* of ___________________________________ of Village/Town* _________________________

District/Division* _____________________________ of State/Union Territory*_____________________________belongs to

the _________________________ Scheduled Caste / Scheduled Tribe* under :-

* The Constitution (Scheduled Castes) Order, 1950

* The Constitution (Scheduled Tribes) Order, 1950

* The Constitution (Scheduled Castes) (Union Territories) Order, 1951

* The Constitution (Scheduled Tribes) (Union Territories) Order, 1951

[As amended by the Scheduled Castes and Scheduled Tribes Lists (Modification Order) 1956, the Bombay Reorganisation

Act, 1960, the Punjab Reorganisation Act, 1966, the State of Himachal Pradesh Act, 1970, the North Eastern Areas

(Reorganisation) Act, 1971, the Scheduled Castes and Scheduled Tribes Orders (Amendment) Act, 1976 and the Scheduled

Castes and Scheduled Tribes Orders (Amendment) Act, 2002]

* The Constitution (Jammu and Kashmir) Scheduled Castes Order, 1956;

* The Constitution (Andaman and Nicobar Islands) Scheduled Tribes Order, 1959, as amended by the Scheduled Castes and

Scheduled Tribes Order (Amendment) Act, 1976;

* The Constitution (Dadara and Nagar Haveli) Scheduled Castes Order, 1962;

* The Constitution (Dadara and Nagar Haveli) Scheduled Tribes Order, 1962;

* The Constitution (Pondicherry) Scheduled Castes Order, 1964;

* The Constitution (Uttar Pradesh) Scheduled Tribes Order, 1967;

* The Constitution (Goa, Daman and Diu) Scheduled Castes Order, 1968;

* The Constitution (Goa, Daman and Diu) Scheduled Tribes Order, 1968;

* The Constitution (Nagaland) Scheduled Tribes Order, 1970;

* The Constitution (Sikkim) Scheduled Castes Order, 1978;

* The Constitution (Sikkim) Scheduled Tribes Order, 1978;

* The Constitution (Jammu and Kashmir) Scheduled Tribes Order, 1989;

* The Constitution (Scheduled Castes) Order (Amendment) Act, 1990;

* The Constitution (Scheduled Tribes) Order (Amendment) Act, 1991;

* The Constitution (Scheduled Tribes) Order (Second Amendment) Act, 1991;

2. # This certificate is issued on the basis of the Scheduled Castes / Scheduled Tribes* Certificate issued to Shri

/Shrimati* ___________________________ father/mother* of Shri /Shrimati /Kumari* _____________________________ of

Village/Town* ________________________________ in District/Division* ________________________________ of the

State State/Union Territory* ___________________________ who belong to the Caste / Tribe* which is recognised as a

Scheduled Caste / Scheduled Tribe* in the State / Union Territory* ____________________ issued by the

________________________ dated____________.

3. Shri/ Shrimati/ Kumari * ___________________________ and / or* his / her* family ordinarily reside(s)** in

Village/Town* ________________________ of __________________District/Division* of the State Union Territory* of

_______________________.

Signature: ______________________

Designation ______________________

(with seal of the Office)

Place: ________________ State/Union Territory* _____________________

Date: ________________

* Please delete the word(s) which are not applicable.

# Applicable in the case of SC/ST Persons who have migrated from another State/UT.

IMPORTANT NOTES

The term “ordinarily reside(s)**” used here will have the same meaning as in Section 20 of the Representation of

the People Act, 1950.

Officers competent to issue Caste/Tribe certificates:

1. District Magistrate / Additional District Magistrate / Collector / Deputy Commissioner / Additional Deputy

Commissioner / Deputy Collector / Ist Class Stipendiary Magistrate / City Magistrate / Sub-Divisional Magistrate /

Taluka Magistrate / Executive Magistrate / Extra Assistant Commissioner.

2. Chief Presidency Magistrate / Additional Chief Presidency Magistrate / Presidency Magistrate.

3. Revenue Officers not below the rank of Tehsildar.

4. Sub-divisional Officer of the area where the candidate and/ or his family normally reside(s).

5. Administrator / Secretary to Administrator / Development Officer (Lakshdweep Island).

6. Certificate issued by any other authority will be rejected.

APPENDIX- 5

FORM OF CERTIFICATE TO BE PRODUCED BY OTHER BACKWARD CLASSES APPLYING

FOR ADMISSION TO CENTRAL EDUCATIONAL INSTITUTIONS (CEIs), UNDER THE

GOVERNMENT OF INDIA

This is to certify that Shri / Smt. / Kum*._________________________________________________ Son / Daughter* of Shri /

Smt.* _____________________________________ of Village/Town* ________________________________District/Division*

__________________________________ in the _________________________ State belongs to the

_______________________
__________

community which is recognized as a backward class under:

(i) Resolution No. 12011/68/93-BCC(C) dated 10/09/93 published in the Gazette of India Extraordinary Part I Section I No. 186

dated 13/09/93.

(ii) Resolution No. 12011/9/94-BCC dated 19/10/94 published in the Gazette of India Extraordinary Part I Section I No. 163 dated

20/10/94.

(iii) Resolution No. 12011/7/95-BCC dated 24/05/95 published in the Gazette of India Extraordinary Part I Section I No. 88 dated

25/05/95.

(iv) Resolution No. 12011/96/94-BCC dated 9/03/96.

(v) Resolution No. 12011/44/96-BCC dated 6/12/96 published in the Gazette of India Extraordinary Part I Section I No. 210 dated

11/12/96.

(vi) Resolution No. 12011/13/97-BCC dated 03/12/97.

(vii) Resolution No. 12011/99/94-BCC dated 11/12/97.

(viii) Resolution No. 12011/68/98-BCC dated 27/10/99.

(ix) Resolution No. 12011/88/98-BCC dated 6/12/99 published in the Gazette of India Extraordinary Part I Section I No. 270 dated

06/12/99.

(x) Resolution No. 12011/36/99-BCC dated 04/04/2000 published in the Gazette of India Extraordinary Part I Section I No. 71 dated

04/04/2000.

(xi) Resolution No. 12011/44/99-BCC dated 21/09/2000 published in the Gazette of India Extraordinary Part I Section I No. 210

dated 21/09/2000.

(xii) Resolution No. 12015/9/2000-BCC dated 06/09/2001.

(xiii) Resolution No. 12011/1/2001-BCC dated 19/06/2003.

(xiv) Resolution No. 12011/4/2002-BCC dated 13/01/2004.

(xv) Resolution No. 12011/9/2004-BCC dated 16/01/2006 published in the Gazette of India Extraordinary Part I Section I No. 210

dated 16/01/2006.

(xvi) Resolution No. 12011/14/2004-BCC dated 12/03/2007 published in the Gazette of India Extraordinary Part I Section I No. 67

dated 12/03/2007.

(xvii) Resolution No. 12015/2/2007-BCC dated 18/08/2010.

(xviii)Resolution No. 12015/13/2010-BCC dated 08/12/2011.

Shri / Smt. / Kum. ________________________________________________________ and / or his family ordinarily reside(s) in

the __________________________ District / Division of ________________________ State. This is also to certify that he/she

does not belong to the persons/sections (Creamy Layer) mentioned in Column 3 of the Schedule to the Government of India,

Department of Personnel & Training O.M. No. 36012/22/93-Estt.(SCT) dated 08/09/93 which is modified vide OM No. 36033/3/2004

Estt.(Res.) dated 09/03/2004, further modified vide OM No. 36033/3/2004-Estt. (Res.) dated 14/10/2008 or the latest notification of

the Government of India.

Dated:

District Magistrate /

Deputy Commissioner /

Competent Authority

Seal

* Please delete the word(s) which are not applicable.

NOTE:

(a) The term ‘Ordinarily resides’ used here will have the same meaning as in Section 20 of the Representation of the People Act,

1950.

(b) The authorities competent to issue Caste Certificates are indicated below:

(i) District Magistrate / Additional Magistrate / Collector / Deputy Commissioner / Additional Deputy Commissioner / Deputy

Collector / Ist Class Stipendiary Magistrate / Sub-Divisional magistrate / Taluka Magistrate / Executive Magistrate / Extra Assistant

Commissioner (not below the rank of Ist Class Stipendiary Magistrate).

(ii) Chief Presidency Magistrate / Additional Chief Presidency Magistrate / Presidency Magistrate.

(iii) Revenue Officer not below the rank of Tehsildar’ and

(iv) Sub-Divisional Officer of the area where the candidate and / or his family resides.

APPENDIX – 6

NAME & ADDRESS OF THE INSTITUTE/HOSPITAL:

Certificate No. ______________________ Date:__________

DISABILITY CERTIFICATE

This is certified that Shri/Smt/Kum___________________________________son/wife/daughter of

Shri___________________________age _______sex___ identification marks (s)________is suffering from

permanent disability of following category:

A. Locomotor or cerebral palsy:

i) BL-Both legs affected but not arms.

ii) BA-Both arms affected

a. Impaired reach

b. Weakness of grip

iii)BLA-Both legs and both arms affected

iv) OL-One leg affected (right or left)

a. Impaired reach

b. Weakness of grip

c. Ataxic

v) OA-One arm affected

a. Impaired reach

b. Weakness of grip

c. Ataxic

vi) BH-Stiff back and hips (cannot sit or stoop)

vii)MW-Muscular weakness and limited physical endurance.

B. Blindness or Low Vision:

(i) B-Blind

(ii) PB-Partially Blind

C. Hearing impairment:

(i) D-Deaf

(ii) PD-Partially Deaf

(Delete the category whichever is not applicable)

2. This condition is progressive/non-progressive/likely to improve/not likely to improve. Re-assessment of

this case is not recommended/is recommended after a period of _____________years_________months.*

4. Sh./Smt./Kum…………………………………………………………..meets the following physical requirement for

discharge of his/her duties:-

(i) F-can perform work by manipulating with fingers. Yes/No

(ii) PP-can perform work by pulling and pushing. Yes/No

Affix Pass port size

photograph here

(iii) L-can perform work by lifting. Yes/No

(iv) KC-can perform work by kneeling and crouching. Yes/No

(v) B-can perform work by bending. Yes/No

(vi) S-can perform work by sitting. Yes/No

(vii) ST-can perform work by standing. Yes/No

(viii) W-can perform work by walking. Yes/No

(ix) SE-can perform work by seeing. Yes/No

(x) H-can perform work by hearing/speaking. Yes/No

(xi) RW-can perform work by reading and writing. Yes/No

*Strike out which is not applicable.

(Dr.___________________) (Dr.______________________) (Dr.____________________)

Reg No. Reg No. Reg No.

Member Member Chairperson

Medical Board Medical Board Medical Board

Countersigned by the

Medical Superintendent/CMO/Head of

Hospital (with seal)

Recent attested

photograph showing

the disability affixed here.

Medical authority competent to issue such a certificate in the district of the applicant’s residence/ the concerned medical authority

in a government hospital where he/she may be undergoing or may have undergone treatment in connection with his/her disability

APPENDIX – 7

WEBSITES, EMAIL ID AND FOR JEE (Advanced) – 2013

ADDRESSES OF ZONAL IITs

Institute Website Email ID

IIT Bombay http://jeeadv.iitb.ac.in/ [email protected]

IIT Delhi http://jeeadv.iitd.ac.in/ [email protected]

IIT Guwahati http://jeeadv.iitg.ac.in/ [email protected]

IIT Kanpur http://jeeadv.iitk.ac.in/ [email protected]

IIT Kharagpur http://jeeadv.iitkgp.ac.in/ [email protected]

IIT Madras http://jeeadv.iitm.ac.in [email protected]

IIT Roorkee http://jeeadv.iitr.ac.in/ [email protected]

Zone Address Phone Fax

IIT Bombay Chairman, JEE (Advanced) – 2013, IIT Bombay,

Powai, Mumbai 400076

(022)25764063 (022)25720305

IIT Delhi Chairman, JEE (Advanced) – 2013, IIT Delhi,

Hauz Khas, New Delhi 110016

(011)26591785 (011)26581067

IIT Guwahati Chairman, JEE (Advanced) – 2013, IIT Guwahati,

Guwahati 781039

(0361)2692795 (0361)2582180

IIT Kanpur Chairman, JEE (Advanced) – 2013, IIT Kanpur,

Kanpur 208016

(0512)2597335 (0512)2590103

IIT Kh
aragpur Chairman, JEE (Advanced) – 2013, IIT

Kharagpur, Kharagpur 721032

(03222)282101 (03222)278242

IIT Madras Chairman, JEE (Advanced) – 2013, IIT Madras,

Chennai 600036

(044)22578220 (044)22578224

IIT Roorkee Chairman, JEE (Advanced) – 2013, IIT Roorkee,

Roorkee 247667

(01332)284272 (01332)285346

22

APPENDIX – 8

SYLLABUS FOR APTITUDE TEST FOR B.Arch. PROGRAMMES

Freehand drawing:

This would comprise of simple drawing depicting the total object in its right form and proportion,

surface texture, relative location and details of its component parts in appropriate scale. Common

domestic or day-to-day life usable objects like furniture, equipment, etc., from memory.

Geometrical drawing:

Exercises in geometrical drawing containing lines, angles, triangles, quadrilaterals, polygons,

circles etc. Study of plan (top view), elevation (front or side views) of simple solid objects like

prisms, cones, cylinders, cubes, splayed surface holders etc.

Three-dimensional perception:

Understanding and appreciation of three-dimensional forms with building elements, colour, volume

and orientation. Visualization through structuring objects in memory.

Imagination and aesthetic sensitivity:

Composition exercise with given elements. Context mapping. Creativity check through innovative

uncommon test with familiar objects. Sense of colour grouping or application.

Architectural awareness:

General interest and awareness of famous architectural creations – both national and

international, places and personalities (architects, designers etc..) in the related domain.

Candidates are advised to bring geometry box sets, pencils, erasers and colour pencils or

crayons for the Aptitude Test.

23

APPENDIX- 9

LIST OF COURSES AVAILABLE IN ALL IITs AND ISM DHANBAD

Applicants must note that:

(a) the titles of the courses listed below may be changed,

(b) some of the listed courses may be dropped or altered

(c) some new courses may be offered.

Therefore the list may not be considered as the final. Exact list will be made available at the time

of counseling.

SN Programme

IIT Bombay

IIT Delhi

IIT Guwahati

IIT Kanpur

IIT Kharagpur

IIT Madras

IIT Roorkee

IIT(BHU) Varanasi

ISM Dhanbad

Programme B.Tech. 4 Years

1 Aerospace Engineering • • • •

2 Agricultural & Food Engineering •

3 Biological Sciences and Bioengineering •

4 Biotechnology • •

5 Biotechnology & Biochemical Engineering •

6 Ceramic Engineering •

7 Chemical Engineering • • • • • • • • •

8 Chemical Science and Technology •

9 Civil Engineering • • • • • • • •

10 Computer Science & Engineering • • • • • • • • •

11 Electrical Engineering • • • • • • • •

12 Electrical Engineering (Power) •

13 Electronics Engineering •

14 Electronics & Communication Engineering • • •

15 Electronics & Electrical Communication Engineering •

16 Electronics & Electrical Engineering •

17 Engineering Physics • • • •

18 Environmental Engineering •

19 Industrial Engineering •

20 Instrumentation Engineering •

21 Manufacturing Science and Engineering •

22 Materials Science and Engineering •

23 Metallurgical & Materials Engineering • • •

24 Mathematics and Computing •

25 Mechanical Engineering • • • • • • • • •

26 Metallurgical Engineering •

27 Metallurgical Engineering & Materials Science • •

28 Mineral Engineering •

29 Mining Engineering • • •

30 Mining Machinery Engineering •

31 Naval Architecture & Ocean Engineering •

24

32 Ocean Engineering & Naval Architecture •

33 Petroleum Engineering •

34 Polymer Science and Technology •

35 Production and Industrial Engineering • •

36 Pulp & Paper Technology •

37 Textile Technology •

Four- year B.S. Courses

38 Chemistry •

39 Economics •

40 Mathematics and Scientific Computing •

41 Physics •

B. Pharm. 4 Years

42 Pharmaceutics •

B. Des. 4 years

43 Design •

B. Arch. 5 years

44 Architecture • •

M. Pharm. Dual Degree 5 years

45 Pharmaceutics •

M.Sc. Integrated 5 years

46 Applied Geology •

47 Applied Mathematics •

48 Applied Physics

49 Chemistry • • •

50 Economics •

51 Exploration Geophysics •

52 Mathematics and Computing • •

53 Physics • •

BS & MS Dual Degree 5 years

54 Physics •

55 Biological Sciences •

M.Sc. Tech. Integrated 5 years

56 Applied Geology •

57 Applied Geophysics •

M.Tech. Integrated 5 year

58 Geological Technology •

59 Geophysical Technology •

60 Engineering Physics •

61 Industrial Chemistry •

62 Mathematics & Computing • •

B.Tech./M.Tech. Dual Degree 5 Years

63 Aerospace Engineering • •

64 Aerospace Engineering with M.Tech. in Applied Mechanics

with specializations in Biomedical Engineering

•

65 Agricultural and Food Engineering with M.Tech in any of

the listed specializations

•

66 Biochemical Engineering •

67 Biological Engineering •

68 Biochemical Engineering & Biotechnology •

25

69 Bioengineering with M.Tech. in Biomedical Technology •

70 Biotechnology •

71 Biotechnology & Biochemical Engineering •

72 Ceramic Engineering •

73 Chemical Engineering • • • •

74 Chemical Engineering with

M. Tech. In Hydrocarbon Engineering

•

75 Civil Engineering with M. Tech. In Applied Mechanics in

any of the listed specialization

•

76 Civil Engineering with M. Tech. In Infrastructural Civil

Engineering

•

77 Civil Engineering with M. Tech. In Structural Engineering • •

78 Civil Engineering with M. Tech. In any of the listed

specialization

• •

79 Computer Science & Engineering • • • •

80 Computer Science & Engineering with

M. Tech. In Information Technology

81 Electrical Engineering with M. Tech. In Applied Mechanics

with specialization in Biomedical Engineering

•

82 Electrical Engineering with M. Tech. In Communications

and Signal Processing

•

83 Electrical Engineering •

84 Electrical Engineering with M. Tech. In Information &

Communication Technology

•

85 Electrical Engineering with M. Tech. In Microelectronics •

86 Electrical Engineering with M. Tech. In Micro-electronics &

VLSI Design

87 Electrical Engineering with M. Tech. In any of the listed

specializations

•

88 Electrical Engineering with M.Tech. in Power Electronics • •

89 Electrical Engineering with M. Tech. In Power Systems

and Power Electronics

90 Electronics & Communication Engineering with M. Tech. In

Wireless Communication

•

91 Electronics & Electrical Communication Engineering with

M. Tech. In any of the listed specializations

•

92 Energy Engineering with M.Tech in Energy Systems

Engineering

•

93 Engineering Design with M. Tech. In Automotive

Engineering

•

94 Engineering Design with M.Tech in Biomedical Design •

95 Quality Engineering Design and Manufacturing •

96 Engineering Physics with M.Tech in Engineering Physics

with specialization in Nano Science

•

97 Industrial Engineering with M. Tech. In Industrial

Engineering and Management

•

98 Manufacturing Science & Engineering with M. Tech. In

Industrial Engineering & Management

•

99 Material Science & Technology •

100 Mechanical Engineering •

101 Mechanical Engineering with M. Tech. In Computer Aided

Design & Automation

•

102 Mechanical Engineering with M. Tech. In Computer

Integrated Manufacturing

•

26

103 Mechanical Engineering with M. Tech. In Thermal

Engineering

•

104 Mechanical Engineering with M. Tech. In Intelligent

Manufacturing

•

105 Mechanical Engineering with M. Tech. In Product Design •

106 Mechanical Engineering with M. Tech. In any of the listed

specialization

•

107 Metallurgical Engineering •

108 B. Tech. In Metallurgical and Materials Engineering and M.

Tech. In Materials Engineering

•

109 Metallurgical Engineering & Materials Science with M.

Tech. in Ceramics & Composites

•

110 Metallurgical Engineering & Materials Science with M.

Tech. in Metallurgical Process Engineering

•

111 Metallurgical & Materials Engineering •

112 Metallurgical & Materials Engineering with

M. Tech. in Metallurgical & Materials Engineering

•

113 Mineral Engineering with M.Tech. in Mineral Engineering •

114 Mineral Engineering with MBA •

115 Mining Engineering • •

116 Mining Engineering with M.Tech. in Mining Engineering •

117 Mining Engineering with MBA •

118 Mining Engineering with M.Tech. in Safety Engineering

and Disaster Management in Mines

•

119 Naval Architecture & Ocean Engineering •

120 Naval Architecture Engineering with M.Tech. in Applied

Mechanics in any of the listed specializations

•

121 Ocean Engineering & Naval Architecture •

122 Petroleum Engineering with M.Tech. in Petroleum

Management

•

123 Process Engineering with MBA •

Programme B.Tech. 4 Years

SN Programme

B.Tech. 4 Years

IIT

Bhubaneswar

IIT

Gandhinagar

IIT Hyderabad

IIT Indore

IIT Mandi

IIT Patna

IIT Ropar

IIT Rajasthan

1 Chemical Engineering • •

2 Civil Engineering • •

3 Computer Science and Engineering • • • • • •

4 Engineering Science •

5 Electrical Engineering • • • • • • • •

6 Mechanical Engineering • • • • • • • •

7 Systems Science •

8 Biologically-inspired Systems Science •

27

APPENDIX-10

IMPORTANT DATES

Start of Online Application for JEE(Main) – 2013 8 Nov. (Thursday) 2012

Closing of Online Application Process 15 Dec. (Saturday) 2012

JEE (Main)- 2013 7 April (Sunday) 2013

Results of JEE (Main)-2013 7 May (Tuesday) 2013

Opening of website for eligible candidates to register for

JEE(Advanced) – 2013

8 May (Wednesday) – 13

May (Monday) 2013

Opening of website for payment of registration fee for JEE

(Advanced) – 2013

8 May (Wednesday) – 13

May (Monday) 2013

Downloading of Admit cards by candidates from zonal IIT JEE

(Advanced) – 2013 Portal

16 May (Thursday) – 31 May

(Friday) 2013

JEE (Advanced) – 2013 2 June (Sunday) 2013

Declaration of Results (including Preparatory) through website 23 June (Sunday) 2013

Online registration open for registering for courses and for

appearing Architecture Aptitude Test

24 June (Monday) – 25 June

(Tuesday) 2013

Architecture Aptitude Test 28 June (Friday) 2013

Declaration of Architecture Aptitude Test results 2 July (Tuesday) 2013