July 2013 – GUNNALAG

July 31, 2013Citrix

Creating a vDisk using Provisioning Services Imaging Wizard on Master Target Device

It is Recommended that you disable any Antivirus software before continuing. Unselect any inactive network adapters: If you attempt to run the Imaging Wizard again you’ll get below error: Restart the VM and Creating new vDisk from client:

July 31, 2013August 12, 2014Server

Windows bcdedit.exe: Windows Boot Manager

C:>bcdedit Windows Boot Manager ——————– identifier {bootmgr} device partition=DeviceHarddiskVolume1 description Windows Boot Manager locale en-US inherit {globalsettings} default {current} resumeobject {3ad6adcc-5afd-11bd-96e4-8645afba729f} displayorder {current} toolsdisplayorder {memdiag} timeout 30 Windows Boot Loader ——————- identifier {current} device partition=C: path Windowssystem32winload.exe description Windows 7 locale en-US inherit {bootloadersettings} recoverysequence {3ad6adce-5afd-11bd-96e4-8645afba729f} recoveryenabled Yes osdevice partition=C: systemroot Windows resumeobject {3ad6adcc-5afd-11bd-96e4-8645afba729f} nx OptIn < p>C:>

July 31, 2013Networking, Windows Technologies

How to build a Test Windows Domain and configure its networking in a VMware Hypervisor

VMWare Hypervisor Host and Network setup: Install a VMware ESXi host, with one NIC card and have it configured to a IP address from your existing valid domain IP-addresses (prefer to be a static) (172.21.1.125). Install vSphere server appliance and have it running either on the same host or on a different device that’s running in the same network (172.21.1.3) Create a separate VM Ports group to classify your Test VMs that going to use their own network setup but all of its traffic will travel with outside world via the same physical NIC adapter as shown below Windows […]